Siemens SINUMERIK User Manual page 217

Required tool
Tool type
35 ° finishing tool
Note
When programming in ISO mode, you need to set the H number of T2 to 2 in the tool list;
•
Cut the workpiece manually after machining is over.
•
Operating sequence for programming in Siemens mode
Programming and Operating Manual (Turning)
01/2017
Tool number
DIN ISO
T2D1 T0202
1. Select the program management operating area.
2. Press this softkey to enter the system directory for storing part programs.
3. Press this softkey and enter the name of the new program.
4. Press this softkey to confirm your entry. The part program editor window opens automatical-
ly.
5. Enter the following program in the window. The control system saves your editing automati-
cally.
Roughing
Speed Feedrate
S1000 F0.2
Finishing
Speed Feedrate
S2000 F0.1
217