Rapid Traverse (G00); Tool And Traverse (T, D, F, G94/G95, S, M3/M4, G01); Tool Radius Compensation (G40, G41/G42) - Siemens SINUMERIK User Manual

7.2.3.3

Rapid traverse (G00)

Description
G00:
When G00 is active in the program, the
axis will traverse at the maximum axis
speed in a straight line.
For more information, see Section "Linear interpolation with rapid traverse: G0 (Page 85)".
7.2.3.4

Tool and traverse (T, D, F, G94/G95, S, M3/M4, G01)

Description
T, D:
A new tool can be selected with the "T" command, and the "D" command
is used to activate the tool length offset.
G94/G95, F:
The feedrate is defined with "F". G94 F defines feedrate in terms of time
(mm/min) and G95 F defines feedrate in terms of spindle revolutions
(mm/rev).
S, M3/M4:
The spindle speed is defined with "S". The spindle direction is defined
with M3 (clockwise) and M4 (counter-clockwise).
G01:
When G01 is active in the program, the axis traverses at the pro-
grammed feedrate (as defined by G94 F or G95 F) in a straight line.
For more information, see sections as follows:
● Tool T (turning) (Page 114)
● Tool offset number D (turning) (Page 115)
● Feedrate F (Page 86)
● Spindle speed S, directions of rotation (Page 101)
● Linear interpolation with feedrate: G1 (Page 87)
7.2.3.5

Tool radius compensation (G40, G41/G42)

The tool radius compensation can be activated (G41/G42) or deactivated (G40) in contour programming.
● G41: tool radius compensation to the left of the contour
● G42: tool radius compensation to the right of the contour
● G40: tool radius compensation off
Programming and Operating Manual (Turning)
01/2017
Illustration
Straight line in any direction
Programming example
N10 G18 G90 G54 G71
N20 T1 D1
N30 S5000 M3 G95 F0.3
N40 G00 X50 Z5
N50 G01 Z-20
N60 Z5
N70 G00 Z500 X200
Programming example
N10 G18 G90 G54 G71
N20 T1 D1
N30 S5000 M3 G95 F0.3
N40 G00 X50 Z5
N50 G01 Z-5
N60 Z5
N70 G00 Z500 Z200
39