Siemens SINUMERIK User Manual page 247

Copying, cutting, and pasting programs
Deleting/restoring programs
Programming and Operating Manual (Turning)
01/2017
1. Select the program management operating area.
2. Open the desired directory.
3. Select the program file that you would like to copy or cut.
4. Perform either of the following operations as desired:
Press this softkey to copy the selected file:
•
Press the following softkeys to cut the selected file:
•
5. Select the target directory with the horizontal softkeys.
6. Press this softkey to paste the file from the clipboard to the current directory.
1. Select the program management operating area.
2. Open the desired directory.
3. Select the program file that you would like to delete.
4. Press this key, and the following message appears on the screen:
5. Press this softkey to confirm the deletion.
6. If you want to restore the last deleted file(s), press this softkey.
→
247