Components Required With Connectorized Odus; Table 2-11 Additional Inventory For Connectorized Odus - Motorola PTP 250 User Manual

PTP 250 User Guide
Item
Drop cable tester

Components required with connectorized ODUs

Connectorized ODUs require the additional components listed in

Table 2-11 Additional inventory for connectorized ODUs

Item
Antenna
RF cable
phn-2182_003v004 (Oct 2011)
Notes
An optional item for testing the
resistances between the RJ45 pins of
the drop cable. Order from
http://www.motorola.com/ptp/support
by selecting Point-to-Point, Order
Cable Tester and completing the
order form.
Notes
One required per link end (or two per link end
for spatial diversity). Not supplied by
Motorola.
For connectorized units operating in the USA
or Canada, choose external antennas from
those listed in
page 2-30.
For connecting the ODU to the antenna. May
be cable of type LMR100, LMR200, LMR300,
LMR400 or LMR600. LMR400 is supplied by
Motorola:
'50 Ohm Braided Coaxial Cable - 75
meter'. Motorola part number
30010194001.
'50 Ohm Braided Coaxial Cable - 500
meter'. Motorola part number
30010195001.
UNDER DEVELOPMENT
Ordering components
Table 2-11.
FCC approved antennas on
2-29