Using the installation wizard
Table 6-3 Step 3: Date and Time Settings attributes
Attribute
Current Time
Time Zone
Enable NTP
Time Server IP
Address
Time Server Port
Synchronization
Interval
User Interface
Timeout
6-20
Meaning
The current date and time setting for this unit.
To update this, select Set Date/Time.
The time zone in which this unit operates.
If this is ticked, the PTP 250 will obtain accurate date and time
updates from a networked time server.
The IP address of the networked NTP server.
The port number of the networked NTP server. By convention
the default value is 123.
The interval at which the PTP 250 requests time correction
updates from the NTP server. If a request fails, the PTP 250
automatically performs three retries before waiting for the next
Synchronization Interval.
The time that is allowed to pass without user activity before the
user is logged out.
UNDER DEVELOPMENT
Chapter 6: Configuration and alignment
phn-2182_003v004 (Oct 2011)