Table 7-3 System Status Equipment Attributes - Motorola PTP 250 User Manual

PTP 250 User Guide

Table 7-3 System Status Equipment attributes

Attribute
Hardware Model
Version
Serial Number
Country
System Name
End Location
Model Number
Connectorized
System Uptime
phn-2182_003v004 (Oct 2011)
Meaning
Hardware model of this unit.
The version of firmware installed. The format of the attributes is
250-xx-yy
where:
xx
is system release,
yy
minor system release.
Serial number of this unit.
The country in which this unit is configured to operate. This is set
at first login, as described in
page 6-6. This can only be reset by restoring the unit to factory
default configuration, as described in
configuration (with country reset)
Name of this PTP 250 system. This is set in the Installation
Wizard; see Step 2: Wireless configuration
Location of this link end. This is set in the Installation Wizard;
see Step 2: Wireless configuration
Model number of this unit.
'Yes' means that the unit is connectorized.
'No' means that the unit is integrated.
The time (days and hh:mm:ss) that has elapsed since the last
system reboot.
The system can reboot for several reasons, for example,
commanded reboot from the Reboot PTP 250 webpage, or a
power cycle of the equipment.
UNDER DEVELOPMENT
Web-based management
Logging into the web interface
Resetting to default
on page 7-26.
on page 6-16.
on page 6-16.
on
7-9