Step 1: Lan Configuration; Figure 6-14 Step 1: Lan Configuration Page - Motorola PTP 250 User Manual

Using the installation wizard

Step 1: LAN configuration

Step 1 of the Installation wizard is for updating the LAN configuration
attributes are described in
Update IP Address, Subnet Mask and Gateway IP Address to meet network requirements
(as specified by the network administrator). Update the other attributes as required and
select Next.

Figure 6-14 Step 1: LAN Configuration page

6-14
Table 6-1.
UNDER DEVELOPMENT
Chapter 6: Configuration and alignment
(Figure
phn-2182_003v004 (Oct 2011)
6-14). The