Connecting link to the network
Connecting link to the network
When antenna alignment is complete, the link performance must be checked and then the
link connected to the network for operational running.
This task consists of the following procedures:
•
Reviewing system configuration attributes
•
Comparing actual to predicted performance
•
Connecting to the network
Reviewing system configuration attributes
Review the system configuration to check that it is correct for operational running. To do
this, select the following menu options:
•
Configuration
•
Configuration, LAN Configuration
•
Configuration, Date/Time
If any settings are incorrect, return to the installation wizard and update the configuration
as described in
6-30
on page
(Figure
6-21).
(Figure
Using the installation wizard
UNDER DEVELOPMENT
Chapter 6: Configuration and alignment
on page
6-30
on page
6-33
6-34
(Figure
6-22).
6-23).
on page 6-13.
phn-2182_003v004 (Oct 2011)