PTP 250 User Guide
Connecting the PoE power supply to the drop cable
The drop cable from the ODU is connected to the DATA & POWER OUT interface of the
PoE power supply.
Do not dress the PoE power supply cables too tightly, as this may make the connections
unreliable.
Fit an RJ45 connector (but no gland) to the PoE end of the LPU-PoE cable. Connect the
cable to the DATA & POWER OUT interface of the PoE power supply.
Figure 5-10 PoE power supply connected to LPU-PoE cable
phn-2182_003v004 (Oct 2011)
UNDER DEVELOPMENT
Installing the PoE power supply
5-31