PTP 250 User Guide
Selecting installation options
Use the installation report to determine which installation options are required. Refer to
PTP LINKPlanner
Preparing personnel
IN NO EVENT SHALL MOTOROLA SOLUTIONS, INC. BE LIABLE FOR ANY INJURY TO
ANY PERSONS OR ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE
MOTOROLA PTP 250.
Ensure that only qualified personnel undertake the installation of a PTP 250 link.
Ensure that all safety precautions can be observed.
Preparing inventory
Perform the following inventory checks:
•
Check that an installation report is available and that it is based on the principles
described in
•
Check that the correct components are available, as described in
on page 2-24.
•
Check the contents of all packages against their packing lists.
Preparing tools
Check that following specific tools are available, in addition to general tools:
•
13mm wrench and 22 mm wrench for use with the glands.
•
RJ45 crimp tool (it must be the correct tool for the type of RJ45 being used).
•
Personal Computer (PC) with 1000BaseT Ethernet.
•
Web browser (for example Internet Explorer 7, Internet Explorer 8, Firefox 3 or Firefox
3.5).
•
Ethernet patch cables.
phn-2182_003v004 (Oct 2011)
on page
2-10
Chapter 2: Planning
considerations.
UNDER DEVELOPMENT
Preparing for installation
Ordering components
5-3