Table of Contents
Advertisement
PTP 250 User Guide
Other standard components
In addition to ODU and PoE power supply kits, standard installations require the
components listed in
Table 2-10 Additional inventory for standard installations
Item
Outdoor drop cable
Always use Cat5e cable that is gel-filled and
shielded with copper-plated steel. Alternative
types of drop cable are not supported by
Motorola.
RJ45 connectors
The specified connectors, crimp tool and die
set are specific to Superior Essex BBDGe cable
(they may not work with other types of cable).
Cable glands
Cable hoisting grip
phn-2182_003v004 (Oct 2011)
Table
2-10.
UNDER DEVELOPMENT
Notes
Superior Essex BBDGe cable is
available from Motorola with the
following lengths and part numbers
(other lengths are available from
Superior Essex):
'1000 ft Reel Outdoor Copper
Clad CAT5E'. Motorola part
number WB3175.
'328 ft (100 m) Reel Outdoor
Copper Clad CAT5E'. Motorola
part number WB3176.
'Tyco/AMP, Mod Plug RJ45
Unscreened, 25 pk'. Motorola part
number WB3177.
'Tyco/AMP Crimp Tool'. Motorola
part number WB3211.
'Tyco/AMP Die Set'. Available from
Tyco, part number 1-853400-0.
For protecting the drop cable entry
points. Glands are included in the
ODU and LPU kits, but additional
glands may be purchased from
Motorola if required.
'PTP SER EMC CABLE GLAND
(GROUNDING)'. Quantity 10.
Motorola, part number WB1811.
For hoisting the drop cable up to the
ODU without damaging the gland or
RJ45 plug.
Not supplied by Motorola.
Ordering components
2-27
Advertisement
Table of Contents
