Wireless operation
Further reading on wireless operation
For information on planning wireless operation, refer to the following:
•
Regulatory planning
spectrum usage, such as frequency range and radar avoidance.
•
Link planning
links, such as range and path loss, and introduces PTP LINKPlanner.
•
Wireless specifications
interface, such as RF bands, channel width, spectrum settings, maximum power and
link loss.
•
Compliance with safety standards
which the PTP 250 has been tested, and describes how to keep RF exposure within
safe limits.
•
Compliance with radio regulations
with the radio regulations that are in force in various countries.
•
Notifications
regulations that are in force in various regions.
For information on configuring and operating the wireless link, refer to the following:
•
Using the installation wizard
interface using the installation wizard.
•
Comparing actual to predicted performance
a newly installed link is achieving predicted levels of performance.
•
Managing performance
PTP 250 link.
•
Testing the radio link
or it is unreliable, or the data throughput rate is too low.
1-22
on page
2-2
describes the regulatory restrictions that affect radio
on page
2-10
describes factors to be taken into account when planning
on page
4-5
on page
4-14
contains notifications of compliance with the radio
on page
on page
7-17
on page
8-12
UNDER DEVELOPMENT
contains specifications of the PTP 250 wireless
on page
4-8
lists the safety specifications against
on page
4-12
describes how the PTP 250 complies
6-13
describes how to configure the wireless
on page
6-33
describes how to manage the performance of a
describes what to do if the radio link is not working,
Chapter 1: Product description
describes how to check that
phn-2182_003v004 (Oct 2011)