Operation And Configuration; Getting Started; Obtaining The Unit Identification (Uid) Number; Lxn 500 Information Label - Motorola LXN 500 Installation, Configuration And Operations Manual

Operation and Configuration

This chapter describes the initial operation and configuration of the LXN 500 system.
WARNING

Getting Started

Obtaining the Unit Identification (UID) Number

The Unit Identification (UID) number is required throughout the configuration process of the LXN 500.
The UID can be found on the information label at the bottom side of the LXN 500.

LXN 500 Information Label

Figure 2-1
Send Feedback
! During operation the LXN 500 enclosure surface can become hot. Before using the LXN 500, refer
to the touch hazard warning label located on the upper side of the enclosure.
MN003563A01-B
Operation and Configuration
17