LEDs Test
The LEDs Test enables to test the illumination of the front panel LEDs. During this test, the LEDs will not
display the current status of the LXN 500.
Perform this procedure to test the front panel LEDs of the LXN 500.
Procedure:
On the System Health screen, check LEDs Test.
1.
Click on a color button.
2.
Result: The front panel LEDs illuminate in the selected color.
LEDs Test
Figure 2-19
System Status
The System Status section displays technical information related to the LXN 500 system health.
The indications shown on this section are identical to these of the status LEDs on the front panel of the
LXN 500. Detailed health status of related software or hardware sections is listed below each LED.
Functioning components are marked by
The System Status information is mostly used by maintenance personnel to perform component level
troubleshoot of the LXN 500.
System Status
Figure 2-20
System Logging
The LXN 500 includes an automatic logging service that registers the following system information:
Error Events
•
Warnings
•
General Information
•
Developers Debug Information
•
Perform this procedure to generate, view and manage an event log.
Send Feedback
and faulty by X.
MN003563A01-B
Operation and Configuration
41