Restore Configuration File; Figure 60 - Restore Configuration File Pop Up Screen - Motorola PTP 600 Series User Manual

8 Web Page Reference
CAUTION: The configuration file is currently restricted to a single software version and can
only be restored into a wireless unit operating the software version indicated in the
configuration file header.
8.3.1.5.2

Restore Configuration File

The configuration file can also be used when swapping out a faulty wireless unit. If one of the
wireless units is replaced on a wireless link a configuration file captured from the faulty unit
can be uploaded into the new unit to speed up replacement.
NOTE: The licence key of the faulty unit should be setup on the replacement unit before the
configuration file is loaded. This can be obtained either from the Quick Start Guide supplied
with the faulty wireless unit or directly from Motorola. The target MAC address at the other
end needs to be changed to ensure that it is using the MAC address of the replaced unit.
The restoration of configuration files can be performed using the Restore configuration tool.
Using the browser button to locate the configuration file you wish to restore then click the
'Restore Configuration File and Reboot' button (Figure 60). The user will then be prompted to
confirm the action (Figure 61)

Figure 60 - Restore Configuration File Pop Up Screen

140