Figure 108 - Reboot Confirmation Pop Up - Motorola PTP 600 Series User Manual

9 Recovery Mode
After carefully checking that correct image has been downloaded the user should reboot the
unit by pressing the "Reboot Wireless Unit" button. The user will then be presented with a pop
up box asking them to confirm the action (Figure 108).

Figure 108 - Reboot Confirmation Pop Up

The unit will now reboot. Providing the unit configuration is still intact the unit should restart in
normal operational mode and the link should recover. Should the unit or link fail to recover the
user should refer to Section 11 " (Fault Finding".
202