Internet Protocol Configuration; Figure 66 - Installation Wizard Internet Protocol Configuration - Motorola PTP 600 Series User Manual

8 Web Page Reference
8.3.4.2

Internet Protocol Configuration

Step 1 of the installation wizard requires the installer to enter the Internet Protocol (IP)
configuration.

Figure 66 - Installation Wizard Internet Protocol Configuration

IP Address: Internet protocol (IP) address. This address is used by the family of Internet
protocols to uniquely identify this unit on a network.
Subnet Mask: A subnet allows the flow of network traffic between hosts to be segregated
based on a network configuration. By organizing hosts into logical groups, subnetting can
improve network security and performance.
Gateway IP Address: The IP address of a computer / router on the current network that acts
as a gateway. A gateway acts as an entrance / exit to packets from / to other networks.
Use VLAN Management Interface: Controls whether the management interfaces
(HTTP/SNMP/SMTP/SNTP) use a VLAN. Selecting this option presents the user with extra
fields in which to enter the Management VLAN ID, Priority and whether to validate the VLAN
ID. If the user modifies this control, a warning dialog is displayed see Figure 67.
153