14 TDD Synchronization Configuration and Installation
Guide
14.2.2 TDD Synchronization Configuration - Standard Mode
When TDD Synchronization is enabled, there is an extra installation screen ("TDD
Synchronization") as shown in Figure 148.
Figure 148 - Configuring TDD Synchronization – Screen 1
The TDD Synchronization screen provides the following controls:
Expert Mode: Select "Yes" to use "Expert Mode". This is an option recommended only for
experienced network and cell planners and is outside the scope of this document (see Figure
150 for parameters required to configure in this mode). If "Expert Mode" is not selected, then
the user is required to enter some basic information to allow the software to calculate the best
values for Frame Duration and Burst Duration.
Longest Link in Network: Default value is 100 kms (60 miles). It is the distance of the
longest link in the network (maximum is 200 kms or 120 miles).
262