Motorola PTP 600 Series User Manual page 147

8 Web Page Reference
Ethernet Tx Packets: This displays the total number of good packets the bridge has sent for
transmission by the local Ethernet interface.
Ethernet Rx Packets: This displays the total number of good packets the bridge has
received from the local Ethernet interface.
Packets To Internal Stack: This displays the total number of good packets the bridge has
transmitted to the internal stack (for example, ARP requests, PING requests, HTTP requests).
Packets From Internal Stack: This displays the total number of good packets the bridge has
received from the internal stack (for example ARP responses, PING replies, HTTP
responses).
Link Symmetry: Master ODU only. The Link Symmetry control setting, expressed as a ratio
of the number of OFDM symbols in each TDD frame where the first number represents the
transmit direction and the second number represents the receive direction.
Transmit Data Rate: The data rate in the transmit direction, expressed in Mbps and
presented as: max, mean, min, and latest in an histogram format. The max, min and latest
are true instantaneous measurements; the mean is the mean of a set of one second means.
See Section 8.2.1 "Histogram Data". Expected data rates can be found in Section 16 "Data
Rate Calculations".
Receive Data Rate: The data rate in the receive direction, expressed in Mbps and presented
as: max, mean, min, and latest in an histogram format. The max, min and latest are true
instantaneous measurements; the mean is the mean of a set of one second means. See
Section 8.2.1 "Histogram Data". Expected data rates can be found in Section 16 "Data Rate
Calculations".
Aggregate Data Rate: The sum of the data rate in the directions expressed in Mbps and
presented as: max, mean, min, and latest in an histogram format. The max, min and latest
are true instantaneous measurements; the mean is the mean of a set of one second means.
See Section 8.2.1 "Histogram Data". Expected data rates can be found in Section 16 "Data
Rate Calculations".
Link Capacity: The maximum aggregate data capacity available for user traffic under the
current radio link conditions, assuming the units have been connected using Gigabit Ethernet.
The sum of the displayed Transmit and Receive data rates may be lower than this figure if the
link isn't fully loaded by the current traffic profile.
145