Fcc Antenna Restrictions On The Ptp 54600; Table 43 - Allowed Antennas For Deployment In Usa/Canada - 5.4 Ghz - Motorola PTP 600 Series User Manual

13.6.4 FCC Antenna Restrictions on the PTP 54600

In FCC regions, external antennas from the list in Table 43 can be used with the
Connectorized version of the PTP 54600. These are approved by the FCC for use with the
product and are constrained by the following limit for Single/Dual Polarization Parabolic Dish
Antennas: up to 34.9 dBi (33.4 dBi for 5 MHz bandwidth) per polarization or antenna.
However, the Maximum Transmit Power must be reduced to avoid exceeding the EIRP limits.
In FCC regions when using external antennas, cable loss between the connectorized version
of the PTP 600 Series Bridge and the antenna ports must not be less than 1.2 dB.
CAUTION: Antennas not included in this table, or those having a gain greater than the
specified maximum, are strictly prohibited for use with the PTP 54600. The required antenna
impedance is 50 ohms.
Table 43 - Allowed Antennas for Deployment in USA/Canada – 5.4 GHz
Manufacturer
Andrew
Andrew
Andrew
Andrew
Andrew
Andrew
Gabriel
Gabriel
Gabriel
Gabriel
Gabriel
Antenna Type
Andrew 2-foot Parabolic, P2F-52 (29.4dBi)
Andrew 2-foot Dual-Pol Parabolic, PX2F-52
(29.4dBi)
Andrew 3-foot Parabolic, P3F-52 (33.4dBi)
Andrew 3-foot Dual-Pol Parabolic, PX3F-52
(33.4dBi)
Andrew 4-foot Parabolic, P4F-52 (34.9dBi)
Andrew 4-foot Dual-Pol Parabolic, PX4F-52
(34.9dBi)
Gabriel 2-foot High Performance QuickFire
Parabolic, HQF2-52-N
Gabriel 4-foot High Performance QuickFire
Parabolic, HQF4-52-N
Gabriel 2-foot High Performance Dual
QuickFire Parabolic, HQFD2-52-N
Gabriel 4-foot High Performance Dual
QuickFire Parabolic, HQFD4-52-N
Gabriel 2-foot Standard QuickFire
Parabolic,
QF2-52-N
246
13 Connectorized PTP 600 Series Bridge
Gain
(dBi)
29.4
29.4
33.4
33.4
34.9
34.9
28.2
34.4
28.1
34.3
28.5
Parabolic
Dish
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y