Graphical Install; Figure 76 - Graphical Installation Screen - Motorola PTP 600 Series User Manual

8.3.5

Graphical Install

To aid the installation of wireless links two graphical installation aids have been introduced in
this 600 Series system version.
x
A PDA installation screen
x
A larger installation screen available from the main HTTP management interface.
The design of the installation screen has been deliberately kept simple and uncluttered. An
example of the installation screen is shown in Figure 76. Both the PDA and the large format
installation screen have the same content and only differ in size. The PDA installation screen
is 232 by 220 pixels to be compatible with the typical size of a PDA screen.
The screen displays the receive power over the last three minutes. This will allow the installer
to slowly sweep the antenna during installation and monitor the variation in signal strength
with angular position. The screen automatically refreshes every three seconds.
The screen also displays the current state of the wireless link in two ways. First, the actual
state of the wireless link is written in the top left corner of the screen. The instantaneous
receive power bar also encodes the state of the wireless link using green to signify that the
wireless link is up and red for all other states.
Figure 76 – Graphical Installation Screen
167
8 Web Page Reference