Vlan Configuration Fields; Ethernet - Motorola PTP 300 Series User Manual

Web Page Reference
Figure 34 VLAN Configuration Fields
Use VLAN For Management Interfaces:This control can be configured with one of the fol-
lowing three values:
• No VLAN Tagging
• IEEE 802.1Q Tagged (C-Tag, Type 8100)
• IEEE 802.1ad Tagged (S-Tag or B-Tag, Type 88a8)
VLAN Management VID: This 802.1Q or 802.1ad VLAN ID (VID) will be included in packets
generated by the management interfaces. Valid settings are in the range 0 to 4094.
VLAN Management Priority: This 802.1Q or 802.1ad VLAN Priority will be included in
packets generated by the management interfaces. Valid settings are in the range 0 to 7.
VLAN Management VID Validation: If enabled, the management interfaces will only respond
to Ethernet packets tagged with the configured Management VID; otherwise packets with any VID
will be accepted.
8.3.1.4 QoS Configuration Page
The QoS configuration page (Figure 35) allows the system administrator to configure the classi-
fication of priority encoded Ethernet frames into up to eight traffic classes.
72