Motorola PTP 600 Series User Manual page 5

The system has been tested for compliance to both US (FCC) and European (ETSI) specifications. It
has been shown to comply with the limits for emitted spurious radiation for a Class B digital device,
pursuant to Part 15 of the FCC Rules in the USA and appropriate European ENs. These limits have
been designed to provide reasonable protection against harmful interference. However the equipment
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to other radio communications. There is no guarantee that
interference will not occur in a particular installation.
CAUTION: When planning a link that will use Connectorized PTP 600 Series bridges (with
external antennas), ensure that regulatory requirements are met for the installation, as
described in Section 13.6 "Regulatory Issues with Connectorized Units".
Regulations applicable to PTP 25600 variant
Examples of Regulatory Limits at 2.5GHz
Under FCC Regulations, operation of this product is only allowed with a License Key
for Region 16 which ensures that the product will meet the requirements of FCC part
27.
FCC
Note: Spectrum in this band (2496MHz to 2690MHz) is allocated on a licensed basis
in USA.
Regulations applicable to PTP 45600 variant
Examples of Regulatory Limits at 4.5GHz
Operation of this product is only allowed with a License Key for Region 23 (USA
Military).
Regulations applicable to PTP 48600 variant
Examples of Regulatory Limits at 4.8GHz
Operation of this product is only allowed with a License Key for Regions 15 or 23
(USA Military).
Regulations applicable to PTP 49600 variant
Examples of Regulatory Limits at 4.9GHz
Operation of this product is only allowed with a License Key for Region 14
(USA/Canada Public Safety) or Region 18 (Hong Kong Public Safety).
3