When the alignment process is complete, the installer MUST REMEMBER TO DISARM
BOTH UNITS in the link, as described in Section 8.3.4 "Install Pages". This is necessary in
order to:
x
Turn off the audible alignment aid (section 8.3.4.6 "Disarm")
x
Enable Adaptive Modulation
x
Fully enable Advanced Spectrum Management with i-DFS
x
Clear unwanted installation information from the various systems statistics
x
Store the link range for fast link acquisition on link drop
x
Enable higher data rates
NOTE: After 24 hours, the units will be disarmed automatically, provided that they are armed
and that the link is UP.
116
7 Installation