Figure 61 - Reset Configuration And Reboot Confirmation Pop-Up - Motorola PTP 600 Series User Manual

Figure 61 - Reset Configuration and Reboot Confirmation Pop-up

On confirmation the PTP 600 Series Bridge will:
x
Upload the configuration file
x
Perform data integrity checking
x
Erase previous configuration
x
Apply the new configuration
x
Restart
After the unit has restarted the entire configuration from the configuration file will now be
active. Note: The IP address of the unit may have also been changed. The user can check
the new IP address by reading the header of the configuration file, Figure 59.
CAUTION: A reboot is always required to restore a configuration file.
141
8 Web Page Reference