Section - 7 - General Specifications & Operator; Introduction; Operating Specifications And Performance; Data - JLG E300AJ Operation And Safety Manual

7.1

INTRODUCTION

This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .......................................... 31215001
Illustrated Parts Manual ............................................................. 31215002
31215000
SECTION 7 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
SECTION 7. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
7.2

OPERATING SPECIFICATIONS AND PERFORMANCE

DATA

Operating Specifications

Table 7-1. Operating specifications - E300AJ
Capacity: Unrestricted: ANSI
Capacity: Unrestricted: CE & Australia
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-1.
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-1.
Drive Speed
Maximum
Reduced
Elevated
Gross Machine Weight - Approximate
Ground Bearing Pressure - Maximum
500 lb. (227 kg)
500 lb. (230 kg)
25%
5°
4.5 mph (7.2 km/h)
2.7 mph (4.3 km/h)
0.3 mph (0.48 km/h)
15060 lb. (6831 kg)
2
170 psi (11.95 kg/cm )
7-1