Installing The System Options/Meap Applications - Canon LBP6680x E-Manual

Installing the System Options/MEAP Applications

The procedures to install the system options or MEAP applications on the printer differ, depending on whether the printer is
connected or not to an outside network. Select the procedure that matches your conditions using the references below.
Installing by Connecting this Printer to an Outside Network
Install from the Remote UI.
NOTE
Communication test
To check that the transmission with the delivery server is properly operating, if necessary, perform a communication test
before installation.
"Testing Communication Using the Remote UI"
Installing by Not Connecting this Printer to an Outside Network
Installing System Options
Install using one of the following procedures.
NOTE
If you install multiple system options
We recommend that you install from the Remote UI.
Procedure
Using the Remote
UI to install
Installing MEAP Applications
Use the following procedure to install.
Procedure
Using the Remote
UI to install
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com
Necessary Steps
1. Obtain the license file from the License
Management System
2. Install the license file using the Remote
UI
Necessary Steps
1. Obtain the license file from the License
Management System
2. Install the license file and application file
using the Remote UI
3. Start the MEAP applications from SMS
manuals search engine
Reference Page
"Obtaining the License File"
"Installing the System Options Using
the Remote UI"
Reference Page
"Obtaining the License File"
"Installing the MEAP Applications
Using the Remote UI"
"Starting the MEAP Applications"
04L9-0CK