Sleep Mode - Canon LBP6680x E-Manual

Sleep Mode

You can specify the settings for sleep mode using the following procedures.
"Setting the Printer to Sleep Mode"
"Sleep Mode Entering Conditions"
"Releasing Sleep Mode"
IMPORTANT
Power consumption when the power is OFF
Even if the printer is turned OFF, power is still consumed slightly while the power plug is inserted in the AC power outlet.
To stop the power consumption completely, unplug the power plug from the AC power outlet.
Setting the Printer to Sleep Mode
There are the following four methods for setting the printer to Sleep Mode.
Setting the printer to
Sleep Mode
automatically when
it is not operating
Setting the printer to
Sleep Mode using
the printer's control
panel
Setting the printer to
Sleep Mode from a
network computer
Setting the printer to
Sleep Mode on the
designated time
every day
If the above operations or settings are performed, and the entering conditions described in
Conditions" are fulfilled, the printer enters Sleep Mode.
Sleep Mode Entering Conditions
The Sleep Mode entering conditions are as follows.
Panel operation has not been performed.
No data has been sent from the computer.
The printer is not starting up.
A shutdown is not being performed.
[Sleep Even if Error] is set to [On].
The following setting items in the [Network] options are set to [Off].
[WINS Resolution] in [TCP/IP Settings]
[IPSec] in [TCP/IP Settings] (LBP6680x only)
[AppleTalk]
[SMB Server] in [SMB] (LBP6680x only)
The printer has not communicated on the network for more than 15 seconds.
A USB cable is not connected.
The SNTP or DHCP communication is not to be performed within 1 minute.
It is not accessing USB memory or the SD card. (LBP6680x only)
The Wake Up function is not to be performed within 1 minute.
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com
Specify the time interval until the printer enters Sleep Mode in [Sleep Migration Time].
You can specify the time interval between [5 minutes] and [60 minutes]. The default is [5
minutes].
We recommend that you use this option in the default setting.
Press [ ] (Energy Saver) on the printer's control panel.
6HOHFW >6OHHS@ IURP >6HWWLQJV5HJLVWUDWLRQ@ RQ WKH 5HPRWH 8,
Control], and then click [Execute].
Set the [Sleep Mode Timer] under [Timer Settings] to [On], and then set the time when it
automatically goes in the Sleep Mode in [Sleep Mode Time].
manuals search engine
04L9-0CE
>2XWSXW&RQWURO@ >'HYLFH
"Sleep Mode Entering