Printed Data Lies Outside Paper - Canon LBP6680x E-Manual

Printed Data Lies outside Paper

Perform one of the following solutions according to the cause.
<Cause 1> When the following settings in the [Select Feeder] menu are set to [Mixed Sizes],
custom size paper whose long edges are 215.9 mm or less is loaded in landscape orientation
and printed (only when the UFR II printer driver is used).
Size of the paper in the multi-purpose tray
Drawer N (N = 1, 2) size
Solution
<Cause 2> When the UFR II printer driver was not used, custom size paper was loaded in
portrait orientation to be printed.
Solution
<Cause 3> Paper is not loaded properly in the paper drawer or multi-purpose tray.
Solution
<Cause 4> The printing position is adjusted in [Adj. Start Position].
Solution
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com
Load the paper in portrait orientation, and then print again.
Load the paper in landscape orientation, and then print again.
Load the paper properly.
"Loading Paper in the Paper Drawer"
"Loading Paper in the Multi-purpose Tray"
The printing position is adjusted in [Adj. Start Position].
"Adjusting the Printing Position for Each Paper Source"
manuals search engine
04L9-0LL