Table of Contents
Advertisement
<Cause 2> The number of the jobs exceeded the amount of jobs the printer can save (You can save up
to 100 jobs in the SD card.)
Solution 1
Solution 2
<Cause 3> The number of the jobs exceeded the number of jobs you can save in the SD card.
Solution 1
Solution 2
<Cause 4> The specified box number is not correct.
Solution
Cannot verify. <Auto Error Skip> (LBP6680x only)
<Cause 1> The department ID and password entered for your job did not match the department ID and
password registered on the machine.
Solution
<Cause 2> Printing jobs with unknown IDs are disallowed.
Solution
Check paper size.
<Cause 1> The size of the paper loaded in a paper source is different from the following settings.
Setting for [Output Size] in the [Page Setup] sheet in the printer driver
[MP Tray Paper Size], [Drawer 1 Size] or [Drawer 2 Size] in the [Select Feeder] menu
Solution
<Cause 2> When the following settings in the [Select Feeder] menu are set to [Mixed Sizes], custom
size paper whose long edges are 215.9 mm or less is loaded in portrait orientation and printed (only
when the UFR II printer driver is used).
[MP Tray Paper Size]
[Drawer 1 Size]
[Drawer 2 Size]
Solution
<Cause 3> When the UFR II printer driver was not used, custom size paper was loaded in landscape
orientation to be printed.
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
"[Setup] Menu ([Control Menu] Options)"
The printer is ready to print by pressing [
Delete unnecessary stored jobs.
The printer is ready to print by pressing [
Delete unnecessary stored jobs.
Specify the correct box number.
Print your job again by entering the correct department ID and password.
Allow print jobs with unknown IDs from the Remote UI.
"Specifying an ID for Each Department (LBP6680x Only)"
Specify the setting properly.
"Registering the Paper Size"
"Configuring the Printer Driver and Printing"
Load the paper in landscape orientation, and then print again.
manuals search engine
] (
: Online), ignoring the print data.
] (
: Online), ignoring the print data.
Advertisement
Table of Contents
