Table of Contents
Advertisement
[Sec. Print Del.
*1 *2
Time]
[Secure Job Log]
[Select PDL
*1*2
(PnP)]
[Mng. Settings]
[Settings Key Lock]
[Adjust Screen]
[Contrast]
[Backlight
Brightness]
[Animated
Instruction]
[Show Toner
Gauge]
[Set. Comp. Notify]
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
[1 hour], [2 hours], [3 hours], [6 hours], [12
hours], [24 hours]
[Off], [On]
[UFR II], [UFR II XPS], [PCL5e], [PCL6],
*2
[PS3]
, [XPS (Direct)]
[Off], [On]
(-3 Dark -0- +3 Light)
[Off], [Level 1], [Level 2], [Level 3]
[Off], [On]
[Off], [On]
[Off], [1 second], [2 seconds], [3 seconds]
manuals search engine
*2
Set the amount of time before secure print
jobs are automatically deleted.
"Specifying a Password for a Document
and Printing (Secured Print) (LBP6680x
Only)"
If [On] is specified for this item, the print log
of the job being printed is saved, and the
total number of printed pages (page counter)
is counted even when you turn the printer
OFF.
If you want to connect the
printer and computer with a USB
cable
The printer driver for this printer may be
installed automatically when the USB
cable is connected.
You can select the type of the printer
driver ("UFR II", "UFR II XPS", "PCL5e",
"PCL6", "PS3", or "XPS (Direct)") to be
installed in this item at the time.
If you want to connect the
printer and computer with a LAN
cable
If you are using Windows Vista, you can
detect the printer automatically using the
WSD (Web Service on Devices) protocol.
You can select the type of the printer
driver ("UFR II", "UFR II XPS", "PCL5e",
"PCL6", "PS3", or "XPS (Direct)") to be
installed on the automatically detected
printer in this item.
When you set to [On], [
: Settings) is locked and you cannot
operate the Setup menu.
When you set to [Off], [Settings Key
Lock] is not locked.
* You can unlock the locked Settings
key only from the Remote UI.
If the display is not clear, adjust the contrast
or brightness to the desired level.
Specifies whether the printer should display
an animated picture in the display when a
paper jam occurs or when a toner cartridge
is replaced.
Specifies whether the printer should display
the icon that indicates the toner remaining.
Specifies the display time of messages that
are displayed when the setting completes. If
[Off] is specified, no setting completion
message is displayed.
Set the scrolling speed for the message
] (
Advertisement
Table of Contents
