Setting the IP Address Using the Printer's Control Panel
To set the IP address using the printer's control panel, use the following menu hierarchies.
* [Protocol] is displayed when [IP Mode] is set to [Auto].
Pressing [
indicates that the procedure is performed by pressing [
indicates that the procedure is performed by pressing [OK] on the control panel.
IMPORTANT
After setting the IP address
To enable the settings, perform a hard reset or restart the printer.
For details on a hard reset, see
To go back up the hierarchy
Press [
] (
About the control panel
For details on the control panel, see
1
Press [
When the message is displayed, press [OK].
You can specify the settings when the printer is either online (the
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
] (
: Settings) displays the common Setup menu.
"Canceling All the Jobs (Hard
: Back).
"Control
] (
: Settings), select [Network] using [
manuals search engine
] or [
Reset)."
Panel."
] and [
(Online) indicator is on) or offline (the
] on the control panel.
], and then press [OK].
04L9-08F