Canon LBP6680x E-Manual page 893

Hide thumbs Also See for LBP6680x:
Table of Contents

Advertisement

Cannot print. Reg. Table is full. <Auto Error Skip>
<Cause> The total number of binders inside a single job exceeds 16, or the number of documents inside
a single binder exceeds 16.
Solution 1
Solution 2
Cannot read PDF data.
<Cause> An error has occurred when the PDF data was read.
Solution
Cannot receive PDF data. Set the receivable size. <Auto Error Skip>
<Cause> There is not sufficient free space to print the PDF file using the direct print function.
Solution 1
Solution 2
Cannot start printing because job is restricted. <Auto Error Skip>
<Cause> Print job restrictions are set.
Solution
Cannot store. <Auto Error Skip>
<Cause 1> [SD Card] in the Control Menu options in the Setup menu is set to [Off].
Solution
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
2. Set [Gradation Level] to [High 1], and then print again.
"[Setup] Menu ([Quality] Options)"
Press [
] (
: Online) to continue printing. However, the data may not be printed properly.
Confirm the data to be printed, and then print again.
Perform the following procedure.
1. Perform a soft reset.
"Canceling the Process Currently Being Performed (Soft Reset)"
2. Print the PDF data in a format which this printer supports again.
Press [
] (
: Online) to cancel the job. Afterward, perform the following processes (decreasing the
size of the PDF file), and then print again.
Optimizing the PDF file
Dividing the PDF file into multiple files
Send the file again using one of the following methods (LBP6680x only).
Insert the SD card into the slot and send the file again.
Send the file directly from the USB memory device.
"Installing SD Card (LBP6680x Only)"
"Printing Files Directly from USB Memory Devices (USB Direct Print) (LBP6680x Only)"
Press [
] (
: Online) to cancel the job. If print job restrictions are set, only the data stored in a box
can be printed. Store the data you want to print in a box.
"Setting Restrictions for Print Jobs"
Perform the following procedure.
1. Cancel printing by pressing [
2. Set [SD Card] to [On] and print again.
manuals search engine
] (
: Online).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lbp6670dn

Table of Contents