Importing And Exporting Settings - Canon LBP6680x E-Manual

Importing and Exporting Settings

You can save (export) printer settings that are set in the operation panel or Remote UI to USB memory devices or SD
cards. In addition, you can read (import) saved printer settings any time.
IMPORTANT
About USB memory support
The file format FAT32 is supported only.
USB memory drives cannot be read by this printer if:
these drives are partitioned
these drives contain encrypted data
Printers that can be imported
You can import the settings only to the same model from which you export the settings.
NOTE
When saving/reading settings using USB memory devices and SD cards
Connect a USB memory device or an SD card to the printer's USB port or SD card slot. The saving location/writing
source priority is shown below.
"USB memory" > "SD card"
Saving Printer Settings (Export)
Save printer settings to USB memory devices or SD cards (LBP6680x only).
1
Insert the USB memory device or the SD card (LBP6680x only) into the printer.
2
Press [ ] (
The Online indicator goes off, allowing you to specify the settings on the control panel.
3
Press [
4
Select [User Maintenance] with [
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com
: Online).
] ( : Settings).
] and [
manuals search engine
], and then press [OK].
04L9-0C6