Table of Contents
Advertisement
6
Specify the settings for SNMP.
Configuring the SNMP Protocol
Specifying User Information to Be Used in the SNMP v. 3 Protocol
Specifying Context Information to Be Used in the SNMP v. 3 Protocol
Configuring the SNMP Protocol
(1) Configure the SNMP v. 1 protocol.
When using SNMPv1 protocol
a. Select the [Use SNMPv1] check box.
b. When using Community Name 1, select the check box for [Use Community Name 1], and set the following
items.
Set the SNMP Community Name in [Community Name 1]. Up to 32 characters can be entered. The
default setting is [public].
Using [MIB Access Permission], select whether to operate the SNMPv1 agent in one of [Read/Write] or
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
manuals search engine
Advertisement
Table of Contents
