Table of Contents
Advertisement
4
Enter the administrator password, and then press the [ENTER] key on your keyboard.
The default password is "7654321".
5
Enter "cd config", and then press the [ENTER] key on your keyboard.
6
Enter "get CONFIG <the file name>", and then press the [ENTER] key on your keyboard.
Enter "CONFIG" as all upper case characters.
The config file is downloaded.
The characters entered for <the file name> become the name of the downloaded file.
If you cannot find the config file
Search for the config file using the file search function of your operating system.
(The download directory for the config file varies depending on the operating system or settings.)
7
Edit the downloaded config file in Notepad or a similar text editor.
For details on descriptions of each option, see
8
Enter "put <the file name> CONFIG", and then press [ENTER] key on your keyboard.
Enter "CONFIG" as all upper case characters.
The edited config file uploads.
In <the file name>, enter the name of the config file that was entered when the file was downloaded.
9
Enter "get reset", and then press the [ENTER] key on your keyboard.
When the printer is restarted the settings will be enabled.
After checking that the printer has restarted, press the [c] key while holding down the [Ctrl] key, and return to the ftp
command prompt.
10
Enter "quit", and then press the [ENTER] key on your keyboard.
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
"Network Setting
manuals search engine
Items."
Advertisement
Table of Contents
