Canon LBP6680x E-Manual page 572

[IPv6 Settings]
[WINS Resolution]
[ARP/PING]
[FTP]
[LPD Print]
[RAW Print]
[IPP Print]
[WSD]
[HTTP]
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com
[IPv6]: [Off], [On]
[Off], [On]
[Off], [On]
[FTP Print]: [Off],
[On]
[FTP Settings]:
[Off], [On]
[Off], [On]
[Off], [On]
[Off], [On]
[WSD Print]:
[Off], [On]
*
[WSD Browsing] :
[Off], [On]
[Multicast
Discovery]: [Off],
[On]
[Off], [On]
[Proxy]: [Off], [On]
*
: -
[Server Address]
*
[Port Number] : 0 to
80 to 99999
manuals search engine
*
Specify the setting for IP v. 6 from the Remote UI.
"Setting IP v. 6"
If you want to use WINS Resolution, specify [On].
*
Specify the following settings from the Remote UI.
[WINS Server Address]
[Scope ID]
[SMB Server Name]
[SMB Workgroup Name]
"Configuring the Protocol Settings"
When it is set to [On], you can change the IP address settings from
the client using ARP/PING commands.
When it is set to [On], you can access the printer's FTP server using
the FTP client and print the files.
If you want to perform the settings using FTP Client, set [FTP
Settings] to [On].
*
Specify the settings for [FTP Print User Name] and
[Password] from the Remote UI.
"Configuring the Protocol Settings"
If you want to use LPD Print, specify [On].
*
Specify the setting for [Print LPD Banner Page] from the
Remote UI.
"Configuring the Protocol Settings"
If you want to use RAW Print, specify [On].
*
Specify the setting for [Use Bidirectional Communication] from
the Remote UI.
"Configuring the Protocol Settings"
If you want to use IPP Print, specify [On].
*
Specify the settings for [IPP Authentication], [User Name],
and [Password] from the Remote UI.
"Configuring the Protocol Settings"
If you want to use WSD Print, set [WSD Print] to [On], and then
specify the following settings.
If you want to obtain printer information using WSD, set [WSD
Browsing] to [On]. If you set [WSD Print] to [On], [WSD
Browsing] is not displayed. ([WSD Browsing] is fixed at [On].)
If you want to set the printer to respond to requests from
multicast discovery, set [Multicast Discovery] to [On].
When it is set to [On], you will be able to access the printer
using HTTP.
When this is set to [Off], the message appears, disallowing you
to use the Remote UI or perform IPP printing.
If you want to use the proxy function, specify [On].
Enter the proxy server address to be used for the proxy function.
Enter the port number of the proxy server to be used for the proxy
function. You can specify between [0] and [99999].