Canon LBP6680x E-Manual page 898

Solution 1
Solution 2
Output tray is full. Remove paper.
<Cause> The output tray is filled to the limit.
Solution
Paper is jammed.
<Cause> Paper is jammed inside the printer.
Solution
IMPORTANT
If paper jams occur at multiple areas at the same time, the areas appear in the display by rotation.
If you removed the jammed paper without opening any cover, be sure to open and close the front cover once, and
then press [
PDF error.
<Cause> PDF data which this printer cannot process was sent.
Solution
PDF font error.
<Cause> PDF font which this printer cannot process was sent.
Solution
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com
IMPORTANT
When continuing printing by pressing [
Be aware that the data of overlay or macro that is already registered may be deleted.
Perform the following procedure.
1. Perform a soft reset.
"Canceling the Process Currently Being Performed (Soft Reset)"
2. After the soft reset, either perform a hard reset or turn the printer back ON, increase memory
capacity and print again. (All data in the memory will be erased.)
"Canceling All the Jobs (Hard Reset)"
Remove the paper in the output tray.
Remove the jammed paper and set the paper drawer and covers to the original position. If the printer is
not online, press [ ] (
"Clearing Paper Jams (Multi-purpose Tray)"
"Clearing Paper Jams (Paper Drawer)"
"Clearing Paper Jams (Duplex Unit)"
"Clearing Paper Jams (Inside the Output Area)"
] ( : Online).
Perform the following procedure.
1. Perform a soft reset.
"Canceling the Process Currently Being Performed (Soft Reset)"
2. Print the PDF data in a format which this printer supports again.
Perform the following procedure.
1. Perform a soft reset.
"Canceling the Process Currently Being Performed (Soft Reset)"
manuals search engine
: Online).
] ( : Online)