Setup] Menu ([Ps] Options) - Canon LBP6680x E-Manual

[Setup] Menu ([PS] Options)

NOTE
Table description
Bold values in the table indicate the default settings.
Setting Item
[Job Timeout]
[Print PS Errors]
[Halftones]
[Grayscale
Conversion]
[Dot Gain
Adjustment]
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com
Setting Value
0 to 3600 seconds
[Off], [On]
[Text]:
[Resolution],
[Gradation], [High
Resolution]
[Graphics]:
[Resolution],
[Gradation], [High
Resolution]
[Image]:
[Resolution],
[Gradation], [High
Resolution]
[sRGB], [NTSC],
[Uniform RGB]
[-10%], [-5%],
[Standard],
[+5%], [+10%]
manuals search engine
If the time specified in this item has elapsed since a job process was
started, the printer automatically finishes the job and receives the next
job.
If you do not want to specify the timeout, specify "0 seconds."
Specifies whether an error page should be printed when a PostScript
error is occurring.
You can select the halftone display method from
[Resolution], [Gradation] and [High Resolution].
[Resolution] allows you to perform printing that combines smooth
gradation with edge quality. It is suitable for printing graphics or
graphs that use gradation.
[Gradation] allows you to print with a sharp gradation and well-
balanced texture, contrasting light and shade, which is best suited
for printing photo images.
[High Resolution] allows you to print in fine detail so that the
edges of text data can be seen clearly. It is suitable for printing
data containing text and fine lines.
Select the method for converting color print data to grayscale for
printing.
When it is set to [sRGB], it calculates the grayscale value using
the sRGB standard color conversion method.
When it is set to [NTSC], it calculates the grayscale value using
the NTSC standard color conversion method.
When it is set to [Uniform RGB], it takes the average value of the
Red, Green and Blue color values as the grayscale value.
You can adjust dotted areas to change darkness and lightness of
painted areas. A higher number specifies a darker printed area.
Setting
04L9-0AX