Table of Contents
Advertisement
4
Select [Adj. Start Position] using [
5
Select the direction and paper source that you want to check the printing position using [
], and then press [OK].
6
Specify the target numeric value using [
Check the printout results of the Printing Position Adjustment Print and select the numerical value to adjust the position.
Each time you press [
decreases in -0.1 mm increments. If you keep holding down [
7
Press [
] (
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
] and [
], the value increases in +0.1 mm increments, and each time you press [
: Online).
manuals search engine
], and then press [OK].
] and [
], and then press [OK].
] or [
], the value changes consecutively.
] and [
], the value
Advertisement
Table of Contents
