Initializing The [Setup] Menu Using The Printer's Control Panel - Canon LBP6680x E-Manual

Initializing the [Setup] Menu Using the Printer's Control Panel

Initialization of the [Setup] menu resets the settings specified in the common [Setup] menu and exclusive [Setup] menu to
the default settings.
Initialize the settings by selecting [Initialize Menu] in the hierarchy of "Options" in the [Setup] menu. Start the key operation
from Step 1.
IMPORTANT
Setting items which are not initialized
The following setting items are not initialized.
[Network] Options
[Adj. Start Position] ([User Maintenance] Options)
If <Initialize failed.> is displayed
If the message <Initialize failed.> appears when the initialization of the [Setup] menu is executed, the [Setup] menu is
not initialized.
Make sure that the
Do not turn the printer OFF during the initialization.
The printer memory may be damaged.
About some setting items
Some setting items do not become effective unless you cycle the power of the printer or perform a hard reset after
initializing the [Setup] menu.
NOTE
Canceling the initialization
If you press [
operation when <Initializing...> is displayed even if you press [
1
Press [
2
Select [Initialize Menu] using [
3
Select [Yes] using [
While the initialization is being performed, <Initializing...> is displayed.
<Init. complete.> is displayed after the initialization is completed.
Downloaded from ManualsPrinter.com Manuals
Downloaded from www.Manualslib.com
(Job) indicator is off, and then perform [Initialize Menu] again.
] ( : Online) during the operation, the operation is canceled. However, you cannot cancel the
] ( : Settings).
] or [
], and then press [OK].
manuals search engine
] ( : Online).
], and then press [OK].
04L9-0C8