Table of Contents
Advertisement
8. Set [User Settings 2] to [User Settings 5] using the same procedure as needed.
If You Want to Change the Status (Valid/Invalid) of User Information
To enable registered user information, select the [Enable User] check box at the top of the targeted user information.
To disable registered user information, clear the [Enable User] check box at the top of the targeted user information.
(2) Proceed to Step 7.
Specifying Context Information to Be Used in the SNMP v. 3 Protocol
(1) Specify the context information to be used in the SNMP v. 3 protocol.
If You Want to Register Context Information
If You Want to Erase Context Information
If You Want to Register Context Information
1. Enter the context names used by the SNMPv3 protocol in [Context Name 1] to [Context Name 5] under
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
set [SNMP v. 3] to [On].
b. Set each password using [Auth. Password] from [User Settings 1] to [User Settings 5].
For details on the SSL encrypted communication function, see
[Context Settings]. Up to 32 characters can be entered.
manuals search engine
"Setting Keys and
Certificates."
Advertisement
Table of Contents
