Table of Contents
Advertisement
2. Specify the target numeric value using [
Each time you press [
decreases by 0.5 mm. Also, if you keep pressing [
increasing or decreasing the value.
The setting value is changed.
If specifying the setting for [Offset X]
1. Select [Offset X] using [
2. Specify the target numeric value using [
Each time you press [
decreases by 0.5 mm. Also, if you keep pressing [
increasing or decreasing the value.
The setting value is changed.
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
], the setting value increases by 0.5 mm, and each time you press [
] and [
], and then press [OK].
], the setting value increases by 0.5 mm, and each time you press [
manuals search engine
] and [
], and then press [OK].
] or [
] without releasing your finger, you can keep
] and [
], and then press [OK].
] or [
] without releasing your finger, you can keep
], the setting value
], the setting value
Advertisement
Table of Contents
