Setting Up HTTP Communication
In order to use MEAP functions from the Web browser, HTTP communication must be enabled.
Follow the steps in the procedure below to configure the settings. (The default settings are [On].)
1
Press [
After the message is displayed, press [OK].
2
Select [TCP/IP Settings] with [
3
Select [HTTP] with [
4
Select [On] with [
[On]
[Off]
5
Hard reset or restart the printer.
Downloaded from ManualsPrinter.com Manuals
Downloaded from
www.Manualslib.com
] (
: Settings), select [Network] with [
] and [
] and [
], and then press [OK].
] and [
], and then press [OK].
It uses HTTP.
It does not use HTTP.
manuals search engine
] and [
], and then press [OK].
04L9-0F7
], and then press [OK].