Cup warmer
6.6
Place the cups to be heated on the cup heater (16).
and turn the cup heater switch to ON (17).
16
Confirm that the light (18) on the front of the
machine is on, as it indicates that the cup-heating
system is active
.
0
1
2
For safety reasons, we do not recommend placing cloths or other
objects on the cup warmer shelf in order to prevent the machine
from overheating.
TECHNICIANS' manual
Autosteamer
6.7
6.7.1 Temperature adjustment
To program the temperature of the milk to be heated,
to consult the par. 7.2.
However, we recommend not to exceed 60°C.
6.7.2 Milk foaming adjustment
To adjust the milk foaming through the autosteamer,
proceed as follows:
1.
Remove the left side panel from the machine (G);
turn the screw of the adjustment valve (H):
2.
- to reduce the foam, turn clockwise;
- to increase the foam, turn counter-clockwise;
place the side back (G) on the machine.
3.
17
18
G
Core200
H
27
54
of