Dispensing With Autosteamer; Dispensing Hot Water; Autosteamer; Hot Water - Astoria Tempesta SAEP Use And Maintenance Manual, Instructions For The User

Dispensing with Autosteamer

7.9
• Immerge the tips of the Autoste-
amer into the milk;
• sur l'écran, sélectionner la tou-
che désirée, par exemple
et patienter jusqu'à ce que la
vapeur s'échappe;;
• wait until the delivery is finished;
• To stop dispensing ahead of
time, press the same key
again.
Medium Continuous

autosteamer

dose
Long autoste-
Short autoste-
amer dose
amer dose
• Only heat the amount of milk that you intend to use;
once heated, the milk will have to be completely
poured out of the jug and cannot be reheated;
• The steam wand guarantees a correspondence of
± 3°C between the set temperature and the real
temperature of the milk, only if the starting milk
temperature is 4°C;
• Since the steam stops dispensing when the set milk
temperature is reached, in order to prevent the milk
froth from spilling out, do not fill the jug more than
half way with liquid;
• Use a suitably-sized container for the amount of milk
that requires frothing (recommended 200 ml approx.),
and cylindrical shape, not conical (see figure).
20 44
of
frothing
Before using the milk frother, press one of the autosteamer
selection buttons to let out some short spurts of air, until all the
condensation water has been released. To stop dispensing, press
the same button again.
Keep the tips clean at all times using a cloth dampened in
lukewarm water. The milk can be kept in the refrigerator for a
maximum of 3-4 days.
Leave the steam nozzle immerged in the milk only for the heating
time required.
To change the autosteamer's temperature or to adjust the milk
foaming, require the intervention of a Qualified Technician.

Dispensing hot water

7.10
• Place the pot under the hot
water spout;
• Select the button on the
display and wait for the hot
water to be dispensed;
• To stop the hot water dispens-
ing ahead of time, press the
button again.
Avoid contact with the hot water nozzle,
do not place your hands or other body
parts near the hot water nozzle tips.
The machine is programmed by default. If you would like to modify
the doses, proceed as indicated in para. 8.1 on page 23.
USER Manual