Services; Sip-Based Media Recording Parameters - AudioCodes Mediant 500 E-SBC User Manual

User's Manual

53.14 Services

53.14.1 SIP-based Media Recording Parameters

The SIP-based media recording parameters are described in the table below.
Parameter
Web: SIP Recording Application
CLI: configure voip/services sip-
recording general-
setting/enable-sip-rec
[EnableSIPRec]
Web: Recording Server (SRS)
Destination Username
CLI: configure voip/services sip-
recording general-
setting/siprec-server-dest-
username
[SIPRecServerDestUsername]
SIP Recording Routing Table
Web: SIP Recording Routing
table
CLI: configure voip/services sip-
recording sip-rec-routing
[SIPRecRouting]
Version 6.8
Table 53-65: SIP-based Media Recording Parameters
Enables the SIP-based Media Recording feature:

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Defines the SIP user part for the recording server. This user part is
added in the SIP To header of the INVITE message that the device
sends to the recording server.
The valid value is a string of up to 50 characters. By default, no
user part is defined.
Defines SIP Recording Routing rules (calls to record).
The format of the ini file table parameter is as follows:
[ SIPRecRouting ]
FORMAT SIPRecRouting_Index =
SIPRecRouting_RecordedIPGroupID,
SIPRecRouting_RecordedSourcePrefix,
SIPRecRouting_RecordedDestinationPrefix,
SIPRecRouting_PeerIPGroupID,
SIPRecRouting_PeerTrunkGroupID, SIPRecRouting_Caller,
SIPRecRouting_SRSIPGroupID;
[ \SIPRecRouting ]
For a detailed description of this table, see ''Configuring SIP
Recording Routing Rules'' on page 194.
53. Configuration Parameters Reference
Description
881 Mediant 500 E-SBC