AudioCodes Mediant 500 E-SBC User Manual page 288

Parameter
[MessageManipulations_Ma
nipulationName]
Manipulation Set ID
CLI: manipulation-set-id
[MessageManipulations_Ma
nSetID]
Matching Characteristics
Message Type
CLI: message-type
[MessageManipulations_Me
ssageType]
Condition
CLI: condition
[MessageManipulations_Co
ndition]
Operation
Action Subject
CLI: action-subject
[MessageManipulations_Act
ionSubject]
Action Type
CLI: action-type
[MessageManipulations_Act
ionType]
User's Manual
The valid value is a string of up to 16 characters.
Defines a Manipulation Set ID for the rule. You can define the same
Manipulation Set ID for multiple rules to create a group of rules. The
Manipulation Set ID is used to assign the manipulation rules to an IP
Group (in the IP Group table) for inbound and/or outbound
messages.
The valid value is 0 to 19. The default is 0.
Defines the SIP message type that you want to manipulate.
The valid value is a string (case-insensitive) denoting the SIP
message.
For example:

Empty = rule applies to all messages

Invite = rule applies to all INVITE requests and responses

Invite.Request = rule applies to INVITE requests

Invite.Response = rule applies to INVITE responses

subscribe.response.2xx = rule applies to SUBSCRIBE
confirmation responses
Note: Currently, SIP 100 Trying messages cannot be manipulated.
Defines the condition that must exist for the rule to apply.
The valid value is a string (case-insensitive).
For example:

header.from.url.user== '100' (indicates that the user part of the
From header must have the value "100")

header.contact.param.expires > '3600'

header.to.url.host contains 'domain'

param.call.dst.user != '100'
Defines the SIP header upon which the manipulation is performed.
The valid value is a string (case-insensitive).
Defines the type of manipulation.

[0] Add (default) = Adds new header/param/body (header or
parameter elements).

[1] Remove = Removes header/param/body (header or
parameter elements).

[2] Modify = Sets element to the new value (all element types).

[3] Add Prefix = Adds value at the beginning of the string (string
element only).

[4] Add Suffix = Adds value at the end of the string (string
element only).

[5] Remove Suffix = Removes value from the end of the string
(string element only).

[6] Remove Prefix = Removes value from the beginning of the
string (string element only).

[7] Normalize = Removes unknown SIP message elements
288
Mediant 500 E-SBC
Description
Document #: LTRT-10427