AudioCodes Mediant 500 E-SBC User Manual page 721

User's Manual
Parameter
Proxy IP Table
Web: Proxy IP Table
EMS: Proxy IP
CLI: configure voip > voip-network
proxy-ip
[ProxyIP]
Proxy Set Table
Web: Proxy Set Table
EMS: Proxy Set
CLI: configure voip > voip-network
proxy-set
[ProxySet]
Version 6.8
response is saved for further uses. A new request is re-sent
with the appropriate credentials. Subsequent requests to the
Proxy are automatically sent with credentials (calculated from
the saved challenge). If the Proxy doesn't accept the new
request and sends another challenge, the old challenge is
replaced with the new one.

[0] None = (Default) Challenges are not cached. Every new
request is sent without preliminary authorization. If the
request is challenged, a new request with authorization data
is sent.

[1] INVITE Only = Challenges issued for INVITE requests
are cached. This prevents a mixture of REGISTER and
INVITE authorizations.

[2] Full = Caches all challenges from the proxies.
Notes:

This parameter is applicable only to the Gateway
application.

Challenge Caching is used with all proxies and not only with
the active one.
This table parameter defines the Proxy Set table with Proxy
Set IDs, each with up to 10 Proxy server IP addresses (or
FQDN).
The format of the ini file table parameter is as follows:
[ProxyIP]
FORMAT ProxyIp_Index = ProxyIp_IpAddress,
ProxyIp_TransportType, ProxyIp_ProxySetId;
[\ProxyIP]
For a description of this table, see ''Configuring Proxy Sets'' on
page 270.
To configure the Proxy Set attributes (such as Proxy Load
Balancing) in the ini file, use the ProxySet parameter.
This table parameter defines the Proxy Set ID table. This
includes, for example, Proxy keep-alive and load balancing and
redundancy mechanisms.
The format of the ini file table parameter is as follows:
[ ProxySet ]
FORMAT ProxySet_Index = ProxySet_ProxyName,
ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime,
ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap, ProxySet_SRD,
ProxySet_ClassificationInput,
ProxySet_ProxyRedundancyMode,
ProxySet_DNSResolveMethod,
ProxySet_KeepAliveFailureResp;
[ \ProxySet ]
For a description of this table, see ''Configuring Proxy Sets'' on
page 270.
For configuring the IP addresses per Proxy Set in the ini file,
721
53. Configuration Parameters Reference
Description
Mediant 500 E-SBC