[Prefix_Srcipgroupid] - AudioCodes Mediant 500 E-SBC User Manual

User's Manual
Parameter
Web: Use Routing Table for Host
Names and Profiles
EMS: Use Routing Table For Host
Names
CLI: rte-tbl-4-host-names
[AlwaysUseRouteTable]
Web/EMS: Tel to IP Routing Mode
CLI: tel2ip-rte-mode
[RouteModeTel2IP]
Outbound IP Routing Table
Web: Outbound IP Routing Table
EMS: SIP Routing > Tel to IP
CLI: configure voip > gw routing tel2ip-
routing
[Prefix]
Inbound IP Routing Table
Web: Inbound IP Routing Table
EMS: SIP Routing > IP to Hunt
CLI: configure voip > gw routing ip2tel-
routing
[PSTNPrefix]
Web/EMS: IP to Tel Routing Mode
Version 6.8
53. Configuration Parameters Reference
Note: For the Gateway / IP-to-IP application, ENUM-based
routing is configured in the Outbound IP Routing table using
the "ENUM" string value as the destination address to
denote this parameter's value.
Determines whether to use the device's routing table to
obtain the URI host name and optionally, an IP profile (per
call) even if a Proxy server is used.

[0] Disable = (Default) Don't use internal routing table.

[1] Enable = Use the Outbound IP Routing table.
Notes:

This parameter appears only if the 'Use Default Proxy'
parameter is enabled.

The domain name is used instead of a Proxy name or IP
address in the INVITE SIP URI.
For a description of this parameter, see ''Configuring
Outbound IP Routing Table'' on page 379.
This table parameter configures the Outbound IP Routing
Table for routing Tel-to-IP and IP-to-IP calls.
The format of this parameter is as follows:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_RouteName,
PREFIX_DestinationPrefix, PREFIX_DestAddress,
PREFIX_SourcePrefix, PREFIX_ProfileId,
PREFIX_MeteringCode, PREFIX_DestPort,
PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix,
PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix,
PREFIX_TransportType, PREFIX_SrcTrunkGroupID,
PREFIX_DestSRD, PREFIX_CostGroup,
PREFIX_ForkingGroup, PREFIX_CallSetupRulesSetId;
[\PREFIX]
For a detailed description of this table, see ''Configuring
Outbound IP Routing Table'' on page 379.
This table parameter configures the routing of IP-to-Trunk
Groups (or inbound IP Groups).
The format of the ini file table parameter is as follows:
[PSTNPrefix]
FORMAT PstnPrefix_Index = PstnPrefix_RouteName,
PstnPrefix_DestPrefix, PstnPrefix_TrunkGroupId,
PstnPrefix_SourcePrefix, PstnPrefix_SourceAddress,
PstnPrefix_ProfileId, PstnPrefix_SrcIPGroupID,
PstnPrefix_DestHostPrefix, PstnPrefix_SrcHostPrefix,
PstnPrefix_SrcSRDID, PstnPrefix_TrunkId,
PstnPrefix_CallSetupRulesSetId;
[\PSTNPrefix]
For a detailed description of this table, see ''Configuring
Inbound IP Routing Table'' on page 388.
Determines whether to route IP calls to the Trunk Group (or
841
Description
Mediant 500 E-SBC